issued by production where it is certified that the temperature sensors have
been manufactured and tested in accordance with the specifications of quality
control ISO9001:2015 and in accordance with the corresponding technical
standards for the type of sensor. In addition to the model/drawing, serial
number and description of the material are also reported the main tests and
checks carried out by our quality control:
addition, additional tests are possible on request or to the specification of
the reference standard.
TYPE EXAMINATION CERTIFICATE certifying that the Equipment or Protective
Systems manufactured by G.Sensor SRL, intended for use in potentially explosive
atmospheres, are in compliance with Directive 2014/34/EU Annex III.
Notified Body declares in the certificate that temperature sensors series
ASPT-H / ASTC-H / ASTC-G of G.Sensor SRL are manufactured in accordance with
the provisions of the Directive 2014/34/EU and applied technical standards, and
that the essential health and safety requirements are ensured by complying with
the standards applied.
issued by the Accredia Calibration Center LAT N°150 of our parent company
A.S.I.T. Instruments Srl, in reference to the requirements of UNI CEI EN
ISO/IEC 17025:2018, of which Accredia is guarantor through the validation of
our technical procedures and technical staff, to ensure traceability of
measurements with regard to the international system of units of
Calibration Certificate assures the customer that the metrology service has
been performed in accordance with the requirements of the standard, with no
further duty to demonstrate to third parties the traceability of the results
transition to the new UNI CEI EN ISO/IEC 17025:2018 standard, on the
Calibration Certificate it is possible to report the declaration of compliance
in relation to the standard/specification identified by the customer in
relation to the results, to which the declaration should be applied and the
decision rule chosen.
This is the declaration that accompanies the
manufactured ATEX temperature sensor, stating that the ASPT-H / ASTC-H / ASTC-G
Series thermometer assembly complies with the essential health and safety
requirements laid down in Directive 2014/34/EU (ATEX) and that it has
undergone a conformity assessment procedure for the categories regarding the
ATEX marking string given in the same declaration.
Furthermore, in addition to
documenting the harmonized standards with which it was designed and
manufactured, the Special Conditions for the Safe Use of the ASPT-H / ASTC-H /
ASTC-G Series Thermometer Assembly are provided.
issued by production that certifies the declaration of compliance having
observed all the provisions contained in the customer order, drawing and
technical specifications required. Document without test related data.
issued by production that certifies the declaration of compliance to the
customer order on the basis of non-specific controls, with indication of the
tests and of the results obtained, also in relation to the corresponding
standard for the type of sensor.
issued, usually referred to as material certificate, which certifies the
compliance of the materials used on the basis of tests carried out on samples,
issued by internal quality control.
Monday-Friday9:00 AM - 1:00 PM2:00 PM - 6:00 PM