Accessories for Temperature Probes

Wide set of accessories for Thermocouples and Thermoresistances

Thermocouple Cable

Thermocouple cables

Extension and compensation cables for Thermocouple
Conductors material B,E,J,K,N,R,S,T Type
Insulation and sheath in Silicon rubber, PVC, Teflon, Kapton, Fiberglass, Ceramic Fiber, Hyflon
Conductors section: 0,22/0,24/0,35/0,50/0,80 mmq (others on request)
Conductors number: 2,4,6 poles
Colouring: IEC, DIN, ANSI
Shielding on request

RTD cables

RTD Connection Cables
Connectors material: Copper, Nickel, Tined copper, silver Copper
Insulation and coating: Silicon rubber, PVC, Teflon, Kapton, Fiberglass, Hyflon and Food silicon rubber
Conduction section: 0,22/0,24/0,35/0,50/0,80 mmq (others on request)
Conductors number: 2,3,4,6 poles

Panel connectors for temperature Probes

Mignon and standard Panel Inserts for Thermocouple and Thermoresistance.
Female plugs 2 or 3 poles
Assembled by stainless bracket, fixing through two screws or clip
Assembled aluminum panel for Thermocouple and Thermoresistance, for installation in control room, testing bench, laboratory applications, pilot plant, etc

Miniature connectors for temperature probes

Thermocouple and Thermoresistance connector.
Suitable to use with thin wires or oxide mineral insulated.
Polarised pin designed for excellent plug/socket connection
Easy conductors connection by sandwich shape setting-up.
Moulded Partitions to avoid short circuits
Strong one-single body.
Screws with head combined (cross and slotted)
Costruction material:
– – Plastic: (Max Temperature 200°C)
– – Thermosetting Resin combined with fiberglass (Max temperature 350°C)
– – Ceramic (Max temperature 650°C)
Poles Numbers: 2 or 3 (the third contact used for earth wire, shield continuity or as third wire for RTD)
Colouring: ANSI, IEC, DIN

Standard Coonectors for temperature probes

Thermocouple and Thermoresistance connector.
Polarised pin designed for excellent plug/socket connection
Empty or full Pins.
Cap with screw in the centre for quick wiring
Screw on the cap for easy assembly
Moulded Partitions to avoid short circuits
Easy conductors connection by sandwich shape setting-up.
Stainless steel Screws with Head combined (cross and slotted)
Strong one-single body.
Costruction material:
– – Plastic: (Max Temperature 200°C)
– – Thermosetting Resin combined with fiberglass (Max temperature 350°C)
– – Ceramic (Max temperature 650°C)
Poles Numbers: 2 or 3 (the third contact used for earth wire, shield continuity or as third wire for RTD)
Colouring: ANSI, IEC, DIN

Thermowell for temperature probes

Heating elements protection from immersion or mecchanical damage, helping a durable operating of the heating elements.
Tube or full bar execution.
Materials in Stainless Steel 304, 310, 316,446, INCONEL600
The tube thermowell execution can be used when there is not mush stress or pressures and when the sheath lenght is very long.
The bar thermowell can be used when the heating element is exposed with high pressure or stress due to liquid process.

Compression fittings