High Temperature
Thermocouple K type
Tolerance class 1, as IEC584
Hot joint insulated
Insulation in MgO compressed
Sheath diameter 0.75mm in Inconel600
Extension cable insulated by fiberglass (Tmax 350 °C)
Male miniature connector for high temperature (Tmax 350 °C)
Single ceramic element for high temperatures
Pt1000 2 wires
Tolerance class B, IEC751
Working range from -50 to +600 °C
MgO compressed insulation
Male miniature connector 4 poles headed on sheath
Sliding compression fitting
Extension with female miniature connector headed on extension cable insulated by silicon rubber
Exposed Hot joint
Sheath sealed by cement for high temperatures
Compressed MgO insulation
Sheath in SS pierced for air-thermic surveys
Thermocouple K Type
Tolerance Class 1 as IEC584 1,2
Insulated single hot joint
Insulation by ceramic insulators with positive and negative K wire, diameter 1.63mm
Sheath to process diameter 50mm in silicon carbide (or silicon carbide nitrided), length 500mm
Sheath to case diameter 20mm in SS304, Length 400mm
Head connection in Aluminum DIN B
Electric input connections M20x1.5mm
2 bores ceramic terminal block
Thermocouple B Single
Thermocouple S Single
Calibration ANSI MC 96.1 Standard
Hot Joint insulated
Platinum-rhodium30% (+) Platinum-rhodium6% (-), section 0,35mmq
Ceramic Insulation KER610 diameter 4mm
Ceramic Sheath 250mm – 400m
Sleeve in AISI310 diameter 20mm
Length 50mm
Connection head DIN B
Terminal Block 2 poles with pull-out insert