Monthly Archives: April 2015

Thermocouple J typeThermocopuple J type with metal loop
Wire execution
Tolerance class 1, as IEC584 1,2
Contact Hot joint on metal loop
Extension cable section 2×0,22 mm2
Insulation: by fiberglass with armor in AISI304, length 2 meters
Metal Loop for screw M6 inserted directly on contact with Hot Jount of the thermocouple
External diameter 12mm, inner diameter 6,25mm

Atex Thermocouple J typeThermocouple Atex J type
Single
Max Temperature: 600 °C
Hot joint insulated
Class 1 as IEC5841,2
Sheath diameter 2mm
Sheath material in AISI316
Insulation in MgO compressed
Sheath length 2500mm from under head
Case connection: ATEX –Ex d
Conduit Input: ½” NPT Female
Ceramic block 2 bores
Sliding compression fitting in AISI ¼” Gas Male
ATEX Thermometric complex comply with safety requirement
Thermometric complex in compliance requirement directive 94/9/CE (ATEX) with certification